Release 8.0
A54638-01
 Library |
 Product |
 Contents |
 Index |
| Oracle8(TM) Server Tuning Release 8.0 A54638-01 |
|
SQL is used to perform all database operations, although some Oracle tools and applications simplify or mask its use. This chapter provides an overview of the issues involved in tuning database operations:
This section introduces:
Always approach the tuning of database operations from the standpoint of the particular goals of your application. Are you tuning serial SQL statements, or parallel operations? Do you have an online transaction processing (OLTP) application, or a data warehousing (DW) application?
As a result, these applications have contrasting goals for tuning.
| Tuning Situation | Goal |
|---|---|
|
Serial SQL Statement |
Minimize resource utilization by the operation. |
|
Parallel Operations |
Maximize throughput for the hardware. |
The goal of tuning one SQL statement in isolation can be stated as follows:
To minimize resource utilization by the operation being performed.
You can explore alternative syntax for SQL statements without actually modifying your application. Simply use the EXPLAIN PLAN command with the alternative statement that you are considering and compare its execution plan and cost with that of the existing statement. You can find the cost of a SQL statement in the POSITION column of the first row generated by the EXPLAIN PLAN command. However, you must run the application to determine which statement can actually be executed more quickly.
See Also: Chapter 20, "The EXPLAIN PLAN Command"
"Approaches to SQL Statement Tuning" on page 7-7
The goal of tuning parallel operations can be stated thus:
To maximize throughput for the given hardware.
If you have a powerful system and a massive, high priority SQL statement to run, you want to parallelize the statement so that it utilizes all available resources.
Oracle can perform the following operations in parallel:
Look for opportunities to parallelize operations in the following situations:
Whenever an operation you are performing in the database takes a long elapsed time, be it a query or a batch job, you may be able to reduce the elapsed time by using parallel operations.
You can split up the rows so they are not all done by a single process.
See Also: Chapter 19, "Tuning Parallel Execution"
Oracle8 Server Concepts, for basic principles of parallel execution
Tuning OLTP applications mostly involves tuning serial SQL statements. You should take into consideration two design level issues: the use of SQL and shared PL/SQL, and use of different transaction modes.
To keep parsing to a minimum, use bind variables in SQL statements within OLTP applications. In this way all users will be able to share the same SQL statements, and fewer resources will be required for parsing.
Sophisticated users can use discrete transactions if performance is of the utmost importance, and they are willing to design the application accordingly.
Serializable transactions can be used if the application must be ANSI compatible. Because of the overhead inherent in serializable transactions, Oracle strongly recommends the use of read-committed transactions instead.
See Also: Chapter 11, "Oracle8 Transaction Modes"
Tuning data warehouse applications involves both serial and parallel SQL statement tuning.
Shared SQL is not recommended with data warehousing applications. Use literal values in these SQL statements, rather than bind variables. If you use bind variables, the optimizer will make a blanket assumption about the selectivity of the column. If you specify a literal value, by contrast, the optimizer can use value histograms and so provide a better access plan.
See Also: Chapter 12, "Managing SQL and Shared PL/SQL Areas"
Whether you are writing new SQL statements or tuning problematic statements in an existing application, your methodology for tuning database operations essentially concerns CPU and disk I/O resources.
See Also: Chapter 13, "Tuning CPU"
Focus your tuning efforts on those statements where the benefit of tuning will demonstrably exceed the cost of tuning. Use tools such as TKPROF, the SQL trace facility, and Oracle Trace to find the problem statements and stored procedures. Alternatively, you can query the V$SORT_USAGE view, which gives the session and SQL statement associated with a temporary segment.
The statements which have the most potential to improve performance, if tuned, include:
In the V$SQLAREA view you can find those statements still in the cache which have done a great deal of disk I/O and buffer gets. (Buffer gets show approximately the amount of CPU resource used.)
See Also: Chapter 22, "The SQL Trace Facility and TKPROF"
Chapter 23, "Using Oracle Trace"
Oracle8 Server Reference Manual for more information about dynamic performance views
Remember that application design is fundamental to performance. No amount of SQL statement tuning can make up for inefficient design. If you encounter stumbling blocks in SQL statement tuning, perhaps you need to change the application design.
You can use two strategies to reduce the resources consumed by a particular statement:
Statements may use the most resources because they do the most work, or because they perform their work inefficiently--or they may do both. However, the lower the resource used per unit of work (per row processed), the more likely it is that you can only significantly reduce resources used by changing the application itself. That is, rather than changing the SQL, it may be more effective to have the application process fewer rows, or process the same rows less frequently.
These two approaches are not mutually exclusive. The former is clearly less expensive since you should be able to accomplish it either without program change (by changing index structures) or by changing only the SQL statement itself rather than the surrounding logic.
This section describes three strategies you can use to speed up SQL statements:
Note: These guidelines are oriented to production SQL that will be frequently executed. Most of the techniques which are discouraged here can legitimately be employed in ad hoc statements or in applications run infrequently, where performance is not critical.
Restructuring the indexes is a good starting point, because it has more impact on the application than does restructuring the statement or the data.
Do not use indexes as a panacea. Application developers sometimes think that performance will improve if they just write enough indexes. If a single programmer creates an appropriate index, this might indeed improve the application's performance. However, if 50 programmers each create an index, the application will probably become bogged down!
After restructuring the indexes, you can try restructuring the statement. Rewriting an inefficient SQL statement is often easier than repairing it. If you understand the purpose of a given statement, you may be able to quickly and easily write a new statement which meets the requirement.
Because SQL is a flexible language, more than one SQL statement may meet the needs of your application. Although two SQL statements may produce the same result, Oracle may process one faster than the other. You can use the results of the EXPLAIN PLAN statement to compare the execution plans and costs of the two statements and determine which is more efficient.
This example shows the execution plans for two SQL statements that perform the same function. Both statements return all the departments in the DEPT table that have no employees in the EMP table. Each statement searches the EMP table with a subquery. Assume there is an index, DEPTNO_INDEX, on the DEPTNO column of the EMP table.
This is the first statement and its execution plan:
SELECT dname, deptno
FROM dept
WHERE deptno NOT IN
(SELECT deptno FROM emp);Figure 7-1: Execution Plan with Two Full Table Scans
Step 3 of the output indicates that Oracle executes this statement by performing a full table scan of the EMP table despite the index on the DEPTNO column. This full table scan can be a time-consuming operation. Oracle does not use the index because the subquery that searches the EMP table does not have a WHERE clause that makes the index available.
However, this SQL statement selects the same rows by accessing the index:
SELECT dname, deptno
FROM dept
WHERE NOT EXISTS
(SELECT deptno
FROM emp
WHERE dept.deptno = emp.deptno);Figure 7-2: Execution Plan with a Full Table Scan and an Index Scan
The WHERE clause of the subquery refers to the DEPTNO column of the EMP table, so the index DEPTNO_INDEX is used. The use of the index is reflected in Step 3 of the execution plan. The index range scan of DEPTNO_INDEX takes less time than the full scan of the EMP table in the first statement. Furthermore, the first query performs one full scan of the EMP table for every DEPTNO in the DEPT table. For these reasons, the second SQL statement is faster than the first.
If you have statements in your applications that use the NOT IN operator, as the first query in this example does, you should consider rewriting them so that they use the NOT EXISTS operator. This would allow such statements to use an index, if one exists.
Use equijoins. Without exception, statements which perform equijoins on untransformed column values are the easiest to tune.
Join order can have a significant impact on performance. The main objective of SQL tuning is to avoid doing unnecessary work to access rows which do not affect the result. This leads to three general rules:
The following example shows how to effectively tune join order:
SELECT stuff
FROM taba a, tabb b, tabc c
WHERE a.acol between :alow and :ahigh
AND b.bcol between :blow and :bhigh
AND c.ccol between :clow and :chigh
AND a.key1 = b.key1
AMD a.key2 = c.key2;
Filter conditions dominate the choice of driving table and index. In general, the driving table should be the one containing the filter condition which eliminates the highest percentage of the table. Thus, if the range of :alow to :ahigh is narrow compared to the range of acol, but the ranges of :b* and :c* are relatively large, then taba should be the driving table, all else being equal.
The first three conditions in the example above are filter conditions applying to only a single table each. The last two conditions are join conditions.
Once you know your driving table, choose the most selective index available to drive into that table. Alternatively, choose a full table scan if that would be more efficient. From there, the joins should all happen through the join indexes, the indexes on the primary or foreign keys used to connect that table to an earlier table in the join tree. Rarely should you use the indexes on the non-join conditions, except for the driving table. Thus, once taba is chosen as the driving table, you should use the indexes on b.key1 and c.key2 to drive into tabb and tabc, respectively.
The work of the following join can be reduced by first joining to the table with the best still-unused filter. Thus, if "bcol between ..." is more restrictive (rejects a higher percentage of the rows seen) than "ccol between ...", the last join can be made easier (with fewer rows) if tabb is joined before tabc.
Use untransformed column values. For example, use
WHERE a.order_no = b.order_no
rather than
WHERE TO_NUMBER (substr(a.order_no, instr(b.order_no, '.') _ 1)
= TO_NUMBER (substr(a.order_no, instr(b.order_no, '.') - 1)
Do not use SQL functions in predicate clauses or WHERE clauses. The use of an aggregate function, especially in a subquery, often indicates that you could have held a derived value on a master record.
Avoid mixed-mode expressions, and beware of implicit type conversions. When you want to use an index on the VARCHAR2 column charcol, but the WHERE clause looks like this:
AND charcol = <numexpr>
where numexpr is an expression of number type (for example, 1, USERENV('SESSIONID'), numcol, numcol+0,...), Oracle will translate that expression into
and to_number(charcol) = numexpr
This has the following consequences:
You can avoid this problem by replacing the top expression with the explicit conversion
and charcol = to_char(<numexpr>)
Alternatively, make all type conversions explicit. The statement
numcol = charexpr
allows use of an index on numcol because the default conversion is always character-to-number. This behavior, however, is subject to change. Making type conversions explicit also makes it clear that charexpr should always translate to a number.
SQL is not a procedural language. Using one piece of SQL to do many different things is not a good idea: it usually results in a less than optimal result for each task. If you want SQL to accomplish different things, then write two different statements rather than having one statement which will do different things depending on the parameters you give it.
Optimization (determining the execution plan) takes place before the database knows what values will be substituted into the query. An execution plan should not, therefore, depend on what those values are. For example:
SELECT stuff from tables
WHERE ...
AND somecolumn BETWEEN decode(:loval, 'ALL', somecolumn, :loval)
AND decode(:hival, 'ALL', somecolumn, :hival);
Written as shown, the database cannot use an index on the somecolumn column because the expression involving that column uses the same column on both sides of the BETWEEN.
This is not a problem if there is some other highly selective, indexable condition you can use to access the driving table. Often, however, this is not the case. Frequently you may want to use an index on a condition like that shown, but need to know the values of :loval, and so on, in advance. With this information you can rule out the ALL case, which should not use the index.
If the index should be used whenever real values are given for :loval and :hival (that is, if you expect narrow ranges, even ranges where :loval often equals :hival), you can rewrite the example in the following logically equivalent form:
SELECT /* change this half of union all if other half changes */ stuff
FROM tables
WHERE ...
AND somecolumn between :loval and :hival
AMD (:hival != 'ALL' and :loval != 'ALL')
UNION ALL
SELECT /* Change this half of union all if other half changes. */ stuff
FROM tables
WHERE ...
AND (:hival = 'ALL' OR :loval = 'ALL')
If you run EXPLAIN PLAN on the new query, you seem to obtain both a desirable and an undesirable execution plan. However, the first condition the database evaluates for either half of the UNION ALL will be the combined condition on whether :hival and :loval are ALL. The database evaluates this condition before actually getting any rows from the execution plan for that part of the query. When the condition comes back false for one part of the UNION ALL query, that part is not evaluated further. Only the part of the execution plan which is optimum for the values provided is actually carried out. Since the final conditions on :hival and :loval are guaranteed to be mutually exclusive, then only one half of the UNION ALL will actually return rows. (The ALL in UNION ALL is logically valid because of this exclusivity. It allows the plan to be carried out without an expensive sort to rule out duplicate rows for the two halves of the query.)
Use optimizer hints, such as /*+ORDERED */ to control access paths. This is a better approach than using traditional techniques or "tricks of the trade" such as CUST_NO + 0. For example, use
SELECT /*+ FULL(EMP) */ E.ENAME
FROM EMP E
WHERE E.JOB = \QCLERK';
rather than
SELECT E.ENAME
FROM EMP E
WHERE E.JOB || '' = \QCLERK';
Oracle does not guarantee that the latter form will suppress use of an index in all future releases.
Remember that WHERE (NOT) EXISTS is a useful alternative.
This is normally a sign that an entity is missing. For example:
WHERE ACC_TYPE NOT IN ('X', 'F', 'C')
Minimize the use of DISTINCT. DISTINCT always creates a SORT; all the data must be instantiated before your results can be returned.
When appropriate, use INSERT, UPDATE, or DELETE RETURNING to select and modify data with a single call. This technique improves performance by reducing the number of calls to the database.
See Also: Oracle8 Server SQL Reference for more information.
Be careful when joining views, when performing outer joins to views, and when you consider recycling views.
Use Care When Joining Views
The shared SQL area in Oracle reduces the cost of parsing queries which reference views. In addition, optimizer improvements make the processing of predicates against views much more efficient than previously. Together these factors make possible the use of views for ad hoc queries. Despite this, joins to views are not recommended, particularly joins from one complex view to another.
The following example shows a query upon a column which is the result of a GROUP BY. The entire view is first instantiated, and then the query is run against the view data.
CREATE VIEW DX(deptno, dname, totsal)
AS SELECT D.deptno, D.dname, E.sum(sal)
FROM emp E, dept D
WHERE E.deptno = D.deptno
GROUP BY deptno, dname SELECT * FROM DX WHERE deptno=10
Use Care When Performing Outer Joins to Views
An outer join to a multi-table view can be problematic. For example, you may start with the usual emp and dept tables with indexes on e.empno, e.deptno, and d.deptno, and create the following view:
CREATE VIEW EMPDEPT (EMPNO, DEPTNO, ename, dname)
AS SELECT E.EMPNO, E.DEPTNO, e.ename, d.dname
FROM DEPT D, EMP E
WHERE E.DEPTNO = D.DEPTNO(+);
You may then construct the simplest possible query to do an outer join into this view on an indexed column (e.deptno) of a table underlying the view:
SELECT e.ename, d.loc
FROM dept d, empdept e
WHERE d.deptno = e.deptno(+)
AND d.deptno = 20;
The following execution plan results:
QUERY_PLAN
--------------------------------------------
MERGE JOIN OUTER
TABLE ACCESS BY ROWID DEPT
INDEX UNIQUE SCAN DEPT_U1: DEPTNO
FILTER
VIEW EMPDEPT
NESTED LOOPS OUTER
TABLE ACCESS FULL EMP
TABLE ACCESS BY ROWID DEPT
INDEX UNIQUE SCAN DEPT_U1: DEPTNO
Until both tables of the view are joined, the optimizer does not know whether the view will generate a matching row. The optimizer must therefore generate all the rows of the view and perform a MERGE JOIN OUTER with all the rows returned from the rest of the query. This approach would be extremely inefficient if all you want is a few rows from a multi-table view with at least one very large table.
To solve this problem is relatively easy, in the preceding example. The second reference to dept is not needed, so you can do an outer join straight to emp. In other cases, the join need not be an outer join. You can still use the view simply by getting rid of the (+) on the join into the view.
Do Not Recycle Views
Beware of writing a view for one purpose then using it for other purposes, to which it may be ill-suited. Consider this example:
SELECT dname from DX
WHERE deptno=10;
You can obtain dname and deptno directly from the DEPT table. It would be inefficient to obtain this information by querying the DX view (which was declared earlier in the present example). To answer the query, the view would perform a join of the DEPT and EMP tables, even though you do not need any data from the EMP table.
After restructuring the indexes and the statement, you can consider restructuring the data.
The overall purpose of any strategy for data distribution is to locate each data attribute such that its value makes the minimum number of network journeys. If the current number of journeys is excessive, then moving (migrating) the data is a natural solution.
Often, however, there is no single location of the data which reduces the network load (or message transmission delays) to an acceptable level. In this case, consider either holding multiple copies (replicating the data) or holding different parts of the data in different places (partitioning the data).
Where distributed queries are necessary, it may be effective to code the required joins procedurally either in PL/SQL within a stored procedure, or within the user interface code.
When considering a cross-network join, note that you can either bring the data in from a remote node and perform the join locally, or you can perform the join remotely. Which option you choose should be determined by the relative volume of data on the different nodes.
