Oracle8
Server Migration Release 8.0 A54650_01 |
|
The Migration Utility can return various error messages and informational messages. This appendix describes the errors that can be encountered when using the Migration Utility. For each error, probable cause and corrective action are given. Informational messages are also listed, although no action is necessary.
Cause: The Migration Utility attempted to reduce the number of file-number bits used in a datablock address.
Action: Contact your Oracle Customer Support representative.
Cause: An internal error occurred. A valid convert file could not be created from the Oracle7 control file.
Action: Check the Oracle7 control file for corruption, fix any problems, and rerun the Migration Utility.
Cause: This is an informational message about the CHECK_ONLY command line argument.
Action: No user action is required.
Cause: These two mutually exclusive command-line options were passed to the Migration Utility.
Action: Rerun the Migration Utility using only one of these options.
Cause: You entered a command-line argument with a value other than TRUE or FALSE.
Action: Check the syntax of the command-line argument, correct the statement, and retry the operation.
Cause: You used a command-line argument improperly.
Action: Check the syntax of the command-line argument, correct the statement, and retry the operation.
Cause: This informational message displays the command-line arguments.
Action: No user action is required.
Cause: An internal error has occurred; possibly the MIGRATE.BSQ script is corrupted.
Action: Check that the version of the Migration Utility, MIGRATE.BSQ, and of the target Oracle8 software are compatible, and that no corruption exists in MIGRATE.BSQ. Fix any such problems, and rerun the Migration Utility.
Cause: An internal error has occurred; possibly the MIGRATE.BSQ script is corrupted.
Action: Check that the version of the Migration Utility, MIGRATE.BSQ, and of the target Oracle8 software are compatible, and that no corruption exists in MIGRATE.BSQ. Fix any such problems, and rerun the Migration Utility.
Cause: An internal error has occurred; possibly the MIGRATE.BSQ script is corrupted.
Action: Check that the version of the Migration Utility, MIGRATE.BSQ, and of the target Oracle7 software are compatible, and that no corruption exists in MIGRATE.BSQ. Fix any such problems, and rerun the Migration Utility.
Cause: You do not have enough contiguous space in your SYSTEM tablespace.
Action: Add free space to your SYSTEM tablespace, and rerun the Migration Utility.
Cause: You do not have enough contiguous space in your SYSTEM tablespace.
Action: Add free space to your SYSTEM tablespace, and rerun the Migration Utility.
Cause: You do not have enough contiguous space in your SYSTEM tablespace.
Action: Add free space to your SYSTEM tablespace, and rerun the Migration Utility.
Cause: You do not have enough contiguous space in your SYSTEM tablespace.
Action: Add free space to your SYSTEM tablespace, and rerun the Migration Utility.
Cause: An internal error has occurred.
Action: Check that the logical is defined correctly, and rerun the Migration Utility.
Cause: Current database is an earlier version than Oracle7, Release 7.1.
Action: Migrate or upgrade current database to Oracle7, Release 7.1, or later, and rerun the Migration Utility.
Cause: An internal error has occurred; possibly the MIGRATE.BSQ script is corrupted.
Action: Check that the version of the Migration Utility, MIGRATE.BSQ, and of the target Oracle7 software are compatible, and that no corruption exists in MIGRATE.BSQ. Fix any such problems and rerun the migration.
Cause: An internal error occurred; a datafile was found in inconsistent state.
Action: Contact your Oracle Customer Support representative.
Cause: The datafile in a tablespace is offline while the tablespace is online. Migration cannot proceed until the datafile and tablespace are both either online or offline normal.
Action: Apply media recovery and bring the datafile online before rerunning the migration.
Cause: This is an informational message about the DBNAME command-line argument.
Action: No user action is required.
Cause: An internal error has occurred; possibly the MIGRATE.BSQ script is corrupted.
Action: Check that the version of the Migration Utility, MIGRATE.BSQ, and of the target Oracle8 software are compatible, and that no corruption exists in MIGRATE.BSQ. Fix any such problems and rerun the migration.
Cause: Entries exist in system.def$_call, def$_calldest, or def$_error.
Action: If entries are in system.def$_call, push all deferred transactions until system.def$_call is empty. If entries are in system.def$_error, resolve and re-execute any errors in the local queue until is empty. Rerun the Migration Utility.
Cause: Error in getting current time from slgtd (internal error)-the Migration Utility might be corrupted.
Action: Check that the version of the Migration Utility, MIGRATE.BSQ, and of the target Oracle8 software are compatible, and that no corruption exists in MIGRATE.BSQ. Fix any such problems, and rerun the Migration Utility.
Cause: An internal error has occurred. Data could not be written to disk.
Action: Check that the file access permissions are correct, that you have enough space or quota to write this file, and that the disk is not corrupt. Fix any problems, and rerun the Migration Utility.
Cause: In this informational message the Migration Utility displays the space required for the object.
Action: No user action is required.
Cause: An internal error has occurred: filename is too large for DBA conversion.
Action: Contact your Oracle Customer Support representative.
Cause: An internal error has occurred.
Action: Check the control file for corruption, fix any problems, and rerun the Migration Utility.
Cause: An internal error has occurred.
Action: Check the control file for corruption, fix any problems, and rerun the Migration Utility.
Cause: An internal error has occurred; possibly the MIGRATE.BSQ script is corrupted.
Action: Check that the version of the Migration Utility, MIGRATE.BSQ, and of the target Oracle8 software are compatible, and that no corruption exists in MIGRATE.BSQ. Fix any such problems, and rerun the Migration Utility.
Cause: This informational message tells how much free space there is in the SYSTEM tablespace.
Action: No user action is needed.
Cause: This informational message tells how much free space there is in the SYSTEM tablespace.
Action: No user action is needed.
Cause: An internal error has occurred. Data could not be written to disk.
Action: Check that the file access permissions are correct, that you have enough space or quota to write this file, and that the disk is not corrupt. Fix any problems, and rerun the Migration Utility.
Cause: There is insufficient room in your SYSTEM tablespace for the new data dictionary information.
Action: Allocate the additional space required in the SYSTEM tablespace, and rerun the Migration Utility.
Cause: The NLS_NCHAR value specified in the command line is invalid.
Action: Correct the NLS_NCHAR value specified in the command line, and rerun the Migration Utility.
Cause: The existing database blocksize is less than 2K bytes.
Action: Make sure the block size of the Oracle7 database is at least 2K bytes. You may consider rebuilding the Oracle7 database. Then rerun the Migration Utility.
Cause: The datafile in a tablespace is online while the tablespace is offline. Migration cannot proceed until the datafile and tablespace are both either online or offline normal.
Action: Make sure the online status of the datafile is the same as the online status of the tablespace, and rerun the Migration Utility.
Cause: One or more tablespaces were offline with outstanding save undo when the Migration Utility attempted to migrate the database.
Action: Go back to Step 4 on page 3-5 in "Prepare the Oracle7 Source Database for Migration" and make certain that all offline tablespaces have been taken offline cleanly. Then rerun the Oracle8 Migration Utility.
Cause: This is an informational message. The Migration Utility is mounting the Oracle7 database.
Action: No user action is required.
Cause: This is an informational message the Migration Utility is displaying about the MULTIPLIER command-line setting.
Action: No user action is required.
Cause: MULTIPLIER value, which specifies the initial size of the Oracle8 i_file#_block# in the command line is less than 2.
Action: Change the MULTIPLIER value to equal or more than 2, and rerun the Migration Utility.
Cause: The new database name specified is more than 8 characters long.
Action: Change the specified name for the new database to 8 or fewer characters, and rerun the Migration Utility.
Cause: This informational message displays information about the NEW_DBNAME command-line argument.
Action: No user action is required.
Cause: .This informational message displays information about the NLS_NCHAR command-line argument.
Action: No user action is required.
Cause: This is an informational message about the NO_SPACE_CHECK command-line argument.
Action: No user action is required, but you should be certain that there is adequate space before you run the Migration Utility with this option.
Cause: An internal error occured while creating the convert file.
Action: Contact your Oracle Customer Support representative.
Cause: This is an informational message. The Migration Utility is opening the Oracle7 database.
Action: No user action is required.
Cause: The ORA_NLS33 environment variable does not point to the NLS datafiles.
Action: Set the ORA_NLS33 environment variable to point to the correct files, and rerun the Migration Utility.
Cause: The Migration Utility has received an ORA error and cannot retrieve the message text for the error.
Action: Take appropriate action for Oracle error number (see Oracle8 Server Messages).
Cause: The initialization parameter file is too large to fit in the buffer.
Action: Reduce the size of the parameter file, possibly by removing any obsolete parameters, and repeat the migration.
Cause: The parameter file for your Oracle7 database exceeds the maximum size given.
Action: If possible, reduce the size of your parameter file by removing obsolete parameters. Otherwise, contact your Oracle Customer Support representative.
Cause: This is an informational message that displays information about the PFILE command-line argument.
Action: No user action is required.
Cause: An internal error has occurred reading file name.
Action: Check that the file and disk are not corrupted. Fix any corruption before restarting the migration.
Cause: There is a problem reading the control file.
Action: Check the control file for corruption, fix any problem found, and rerun the the migration.
Cause: An internal error has occurred.
Action: Additional error messages should inform you of the cause of the shutdown. Follow the actions suggested for these messages.
Cause: This is an informational message. The Migration Utility is shutting down the Oracle7 database.
Action: No user action is required.
Cause: This is an informational message that displays information about the SPOOL command-line argument.
Action: No user action is required.
Cause: This is an informational message. The Migration Utility is starting up an Oracle7 instance.
Action: No user action is required.
Cause: String in command line argument given to the Migration Utility exceeded the maximum size.
Action: Shorten the string in command line argument, and rerun the Migration Utility.
Cause: Tablespace was taken offline IMMEDIATE or TEMPORARY.
Action: Bring tablespace online, and then take it offline NORMAL or drop it before rerunning the Migration Utility.
Cause: You specified too many arguments on the command-line.
Action: Check the syntax of the command and specify fewer command-line options.
Cause: The Migration Utility could not allocate memory to serve as a buffer for copying LONG columns in the database.
Action: Make sure enough machine resources are available for the utility, and rerun the Migration Utility.
Cause: An internal error has occurred, or a file was not in the expected location when the Oracle8 Migration Utility was started.
Action: Check that the file exists and has access permissions that allow Oracle to open and read the file. If possible, check that the file is not corrupt and the disks on which the file resides are not corrupt. Fix any problems and restart the Migration Utility.
Cause: An internal error occurred or a file was not in the expected location when the Migration Utility was started.
Action: Check that the file exists and has access permissions that allow Oracle to open and read the file. If possible, check that the file is not corrupt and the disks on which the file resides are not corrupt. Fix any problems and restart the Migration Utility.
Cause: An internal error occurred.
Action: Check that the correct access permissions exist for Oracle to write to the file. Check that the disks to which the file is being written are not corrupt. Fix any such corruption before restarting the migration.
Cause: This is an informational message that informs you how much additional space you need in your SYSTEM tablespace to run the Migration Utility successfully.
Action: Be certain that you have the specified amount of additional space before running the Migration Utility.
|
Copyright © 1997 Oracle Corporation. All Rights Reserved. |
|