NAME
	  fglFogf, fglFogi, fglFogfv, fglFogiv - specify fog
	  parameters


     FORTRAN SPECIFICATION
	  SUBROUTINE fglFogf( INTEGER*4	pname,
			      REAL*4 param )
	  SUBROUTINE fglFogi( INTEGER*4	pname,
			      INTEGER*4	param )


     PARAMETERS
	  pname	  Specifies a single-valued fog	parameter.
		  GL_FOG_MODE, GL_FOG_DENSITY, GL_FOG_START,
		  GL_FOG_END, and GL_FOG_INDEX are accepted.

	  param	  Specifies the	value that pname will be set to.

     FORTRAN SPECIFICATION
	  SUBROUTINE fglFogfv( INTEGER*4 pname,
			       CHARACTER*8 params )
	  SUBROUTINE fglFogiv( INTEGER*4 pname,
			       CHARACTER*8 params )


     PARAMETERS
	  pname
	       Specifies a fog parameter.  GL_FOG_MODE,
	       GL_FOG_DENSITY, GL_FOG_START, GL_FOG_END, GL_FOG_INDEX,
	       and GL_FOG_COLOR	are accepted.

	  params
	       Specifies the value or values to	be assigned to pname.
	       GL_FOG_COLOR requires an	array of four values.  All
	       other parameters	accept an array	containing only	a
	       single value.

     DESCRIPTION
	  Fog is initially disabled.  While enabled, fog affects
	  rasterized geometry, bitmaps,	and pixel blocks, but not
	  buffer clear operations. To enable and disable fog, call
	  fglEnable and	fglDisable with	argument GL_FOG.

	  fglFog assigns the value or values in	params to the fog
	  parameter specified by pname.	 The following values are
	  accepted for pname:

	  GL_FOG_MODE	      params is	a single integer or floating-
			      point value that specifies the equation
			      to be used to compute the	fog blend
			      factor, f.  Three	symbolic constants are
			      accepted:	 GL_LINEAR, GL_EXP, and
			      GL_EXP2.	The equations corresponding to
			      these symbolic constants are defined
			      below.  The initial fog mode is GL_EXP.

	  GL_FOG_DENSITY      params is	a single integer or floating-
			      point value that specifies density, the
			      fog density used in both exponential fog
			      equations.  Only nonnegative densities
			      are accepted.  The initial fog density
			      is 1.

	  GL_FOG_START	      params is	a single integer or floating-
			      point value that specifies start,	the
			      near distance used in the	linear fog
			      equation.	 The initial near distance is
			      0.

	  GL_FOG_END	      params is	a single integer or floating-
			      point value that specifies end, the far
			      distance used in the linear fog
			      equation.	 The initial far distance is
			      1.

	  GL_FOG_INDEX	      params is	a single integer or floating-
			      point value that specifies i , the fog
			      color index.  The	initial	fog index is
			      0.

	  GL_FOG_COLOR	      params contains four integer or
			      floating-point values that specify C ,
			      the fog color.  Integer values are  f
			      mapped linearly such that	the most
			      positive representable value maps	to
			      1.0, and the most	negative representable
			      value maps to -1.0.  Floating-point
			      values are mapped	directly.  After
			      conversion, all color components are
			      clamped to the range [0,1].  The initial
			      fog color	is (0, 0, 0, 0).

	  Fog blends a fog color with each rasterized pixel fragment's
	  posttexturing	color using a blending factor f.  Factor f is
	  computed in one of three ways, depending on the fog mode.
	  Let z	be the distance	in eye coordinates from	the origin to
	  the fragment being fogged.  The equation for GL_LINEAR fog
	  is

				f = ___________
				    end	- start

	  The equation for GL_EXP fog is
			    f =	e**(-(density .	z))


	  The equation for GL_EXP2 fog is

			   f = e**(-(density . z)**2)


	  Regardless of	the fog	mode, f	is clamped to the range	[0,1]
	  after	it is computed.	 Then, if the GL is in RGBA color
	  mode,	the fragment's color C	is replaced by
				      r
			       C ' = fC	+(1-f)C
				r      r       f
	  In color index mode, the fragment's color index i  is
	  replaced by					   r

				i ' = i	+(1-f)i
				 r     r       f
     ERRORS
	  GL_INVALID_ENUM is generated if pname	is not an accepted
	  value, or if pname is	GL_FOG_MODE and	params is not an
	  accepted value.

	  GL_INVALID_VALUE is generated	if pname is GL_FOG_DENSITY,
	  and params is	negative.

	  GL_INVALID_OPERATION is generated if fglFog is executed
	  between the execution	of fglBegin and	the corresponding
	  execution of fglEnd.

     ASSOCIATED	GETS
	  fglIsEnabled with argument GL_FOG
	  fglGet with argument GL_FOG_COLOR
	  fglGet with argument GL_FOG_INDEX
	  fglGet with argument GL_FOG_DENSITY
	  fglGet with argument GL_FOG_START
	  fglGet with argument GL_FOG_END
	  fglGet with argument GL_FOG_MODE

     SEE ALSO
	  fglEnable